Signing commits with GPG

NOTE: Note: The term GPG is used for all OpenPGP/PGP/GPG related material and implementations.

  • Introduced in GitLab 9.5.
  • Subkeys support was added in GitLab 10.1.

GitLab can show whether a commit is verified or not when signed with a GPG key. All you need to do is upload the public GPG key in your profile settings.

GPG verified tags are not supported yet.

Getting started with GPG

Here are a few guides to get you started with GPG:

How GitLab handles GPG

GitLab uses its own keyring to verify the GPG signature. It does not access any public key server.

In order to have a commit verified on GitLab the corresponding public key needs to be uploaded to GitLab. For a signature to be verified three conditions need to be met:

  1. The public key needs to be added your GitLab account
  2. One of the emails in the GPG key matches a verified email address you use in GitLab
  3. The committer's email matches the verified email from the gpg key

Generating a GPG key

Notes:

  • If your Operating System has gpg2 installed, replace gpg with gpg2 in the following commands.
  • If Git is using gpg and you get errors like secret key not available or gpg: signing failed: secret key not available, run the following command to change to gpg2: git config --global gpg.program gpg2

If you don't already have a GPG key, the following steps will help you get started:

  1. Install GPG for your operating system
  2. Generate the private/public key pair with the following command:

    gpg --full-gen-key

    This will spawn a series of questions.

  3. The first question is which algorithm can be used. Select the kind you want or press Enter to choose the default (RSA and RSA):

    Please select what kind of key you want:
       (1) RSA and RSA (default)
       (2) DSA and Elgamal
       (3) DSA (sign only)
       (4) RSA (sign only)
    Your selection? 1
  4. The next question is key length. We recommend to choose the highest value which is 4096:

    RSA keys may be between 1024 and 4096 bits long.
    What keysize do you want? (2048) 4096
    Requested keysize is 4096 bits
  5. Next, you need to specify the validity period of your key. This is something subjective, and you can use the default value which is to never expire:

    Please specify how long the key should be valid.
             0 = key does not expire
          <n>  = key expires in n days
          <n>w = key expires in n weeks
          <n>m = key expires in n months
          <n>y = key expires in n years
    Key is valid for? (0) 0
    Key does not expire at all
  6. Confirm that the answers you gave were correct by typing y:

    Is this correct? (y/N) y
  7. Enter you real name, the email address to be associated with this key (should match a verified email address you use in GitLab) and an optional comment (press Enter to skip):

    GnuPG needs to construct a user ID to identify your key.
    
    Real name: Mr. Robot
    Email address: mr@robot.sh
    Comment:
    You selected this USER-ID:
        "Mr. Robot <mr@robot.sh>"
    
    Change (N)ame, (C)omment, (E)mail or (O)kay/(Q)uit? O
  8. Pick a strong password when asked and type it twice to confirm.

  9. Use the following command to list the private GPG key you just created:

    gpg --list-secret-keys --keyid-format LONG mr@robot.sh

    Replace mr@robot.sh with the email address you entered above.

  10. Copy the GPG key ID that starts with sec. In the following example, that's 30F2B65B9246B6CA:

    sec   rsa4096/30F2B65B9246B6CA 2017-08-18 [SC]
          D5E4F29F3275DC0CDA8FFC8730F2B65B9246B6CA
    uid                   [ultimate] Mr. Robot <mr@robot.sh>
    ssb   rsa4096/B7ABC0813E4028C0 2017-08-18 [E]
  11. Export the public key of that ID (replace your key ID from the previous step):

    gpg --armor --export 30F2B65B9246B6CA
  12. Finally, copy the public key and add it in your profile settings

Adding a GPG key to your account

Note: Once you add a key, you cannot edit it, only remove it. In case the paste didn't work, you'll have to remove the offending key and re-add it.

You can add a GPG key in your profile's settings:

  1. On the upper right corner, click on your avatar and go to your Settings.

    Settings dropdown

  2. Navigate to the GPG keys tab and paste your public key in the 'Key' box.

    Paste GPG public key

  3. Finally, click on Add key to add it to GitLab. You will be able to see its fingerprint, the corresponding email address and creation date.

    GPG key single page

Associating your GPG key with Git

After you have created your GPG key and added it to your account, it's time to tell Git which key to use.

  1. Use the following command to list the private GPG key you just created:

    gpg --list-secret-keys --keyid-format LONG mr@robot.sh

    Replace mr@robot.sh with the email address you entered above.

  2. Copy the GPG key ID that starts with sec. In the following example, that's 30F2B65B9246B6CA:

    sec   rsa4096/30F2B65B9246B6CA 2017-08-18 [SC]
          D5E4F29F3275DC0CDA8FFC8730F2B65B9246B6CA
    uid                   [ultimate] Mr. Robot <mr@robot.sh>
    ssb   rsa4096/B7ABC0813E4028C0 2017-08-18 [E]
  3. Tell Git to use that key to sign the commits:

    git config --global user.signingkey 30F2B65B9246B6CA

    Replace 30F2B65B9246B6CA with your GPG key ID.

Signing commits

After you have created your GPG key and added it to your account, you can start signing your commits:

  1. Commit like you used to, the only difference is the addition of the -S flag:

    git commit -S -m "My commit msg"
  2. Enter the passphrase of your GPG key when asked.

  3. Push to GitLab and check that your commits are verified.

If you don't want to type the -S flag every time you commit, you can tell Git to sign your commits automatically:

git config --global commit.gpgsign true

Verifying commits

  1. Within a project or merge request, navigate to the Commits tab. Signed commits will show a badge containing either "Verified" or "Unverified", depending on the verification status of the GPG signature.

    Signed and unsigned commits

  2. By clicking on the GPG badge, details of the signature are displayed.

    Signed commit with verified signature

    Signed commit with verified signature

Revoking a GPG key

Revoking a key unverifies already signed commits. Commits that were verified by using this key will change to an unverified state. Future commits will also stay unverified once you revoke this key. This action should be used in case your key has been compromised.

To revoke a GPG key:

  1. On the upper right corner, click on your avatar and go to your Settings.
  2. Navigate to the GPG keys tab.
  3. Click on Revoke besides the GPG key you want to delete.

Removing a GPG key

Removing a key does not unverify already signed commits. Commits that were verified by using this key will stay verified. Only unpushed commits will stay unverified once you remove this key. To unverify already signed commits, you need to revoke the associated GPG key from your account.

To remove a GPG key from your account:

  1. On the upper right corner, click on your avatar and go to your Settings.
  2. Navigate to the GPG keys tab.
  3. Click on the trash icon besides the GPG key you want to delete.